How To Reset Your Security System In Charleston

One perk of having your security system installed by trained experts is that you rarely need to concern yourself with it. However, there could be a couple situations where you need to reset your alarms in Charleston. If you’re utilizing a smart command panel, resetting usually takes a few minor taps of the touchscreen after common events like false alarms and battery changes.

Check Your Owner’s Manual Before Resetting Your Alarm

Here’s a simple yet valuable tip before you start resetting your Charleston home security system, check your instruction manual prior to proceeding. You wouldn’t want to compromise your system as a result of touching something incorrectly. Additionally, your system may change if you upgraded from a numbered keypad to a digital command hub. If there’s ever a time when you’re unable to figure out how to reset your system, don't worry as you can always reach out to your trusted security specialists.

Resetting Your Charleston Security System Due To A False Alarm

Typically, a false alarm takes place due to a sensor that was tripped by accident. You may use the ADT Command touchscreen or bring up your ADT smartphone app and tap the shield option and submit your unique passcode to switch off the system for these instances. You might receive notification from your 24-hour monitoring specialists, but just tell them you experienced a false alarm.

Resetting Your Alarm When Experiencing A Power Outage In Charleston

When you lose power because of a storm or other event, you might begin hearing a steady beep from your control panel. That indicates that your security is being powered by the backup battery. To reset the alarm and stop the constant chirping, you need to deactivate and reactivate your system.

But please note, if power is out for an extended time, you could need a full reset of your home’s security. Heed the directions in the instruction manual -- usually by putting in your unique passcode and hitting the on/off button twice -- and you should be back to normal. You might still hear the auxiliary power beeping, as it’s possible it won’t end until the battery charges entirely. Contact your security technician if you keep having difficulties with your ADT controls a day after your power is back on.

How To Reset Your Home Security System After Replacing A Battery

There will be infrequent times when you must switch out a battery within one of your home security components. In order to accomplish this, you should switch your home’s defense to Test Mode so you don't trigger an accidental alarm. After the new battery is put in place, move the alarm from "Test Mode" and revert back to your usual settings. If the control panel fails to register the component or the battery light stays on, you could need a total reset of the system.

Resetting Your Charleston Security System Following The Addition Or Deletion Of Someone

The addition and deletion of users can be completed on your ADT Command hub and the ADT Control mobile app. You won’t need a reset of your alarm after adding or removing users. But you should note, if you find yourself moving to a new property that already has an ADT system, you'll want to call your security specialists at (304) 220-0469 to start a new contract. The installation tech will visit your property to upgrade components, set up more devices (as required), and reset the system for you.

An Easy-To-Use Security System Can Be Yours Today

Resetting a home security system in Charleston is frustrating if it doesn’t have clear devices and controls. If the time has come to find your intuitive home protection system, contact (304) 220-0469 or send in the form below. Our team is happy to help customize the ideal security system for your needs.